6
Operation
Intended Use
This article is for decoration only. The article is not for household lighting. It is
only for indoor use!
Inserting the Batteries
1. Unscrew the small screw with a screwdriver and open the battery
compartment opening the latch and removing the cover. Insert three bat-
teries of the type LR6 (AA) into the battery compartment.
2. Close the battery compartment. Observe the polarity symbols in the
battery compartment. Re-tighten the small screw.
Operation
1. Put the stand of the Magic Village on a level
and solid surface.
2.
Set the ON/OFF switch to the “
ON1
” position
to start-up the Magic Village with light and
music. All available music titles will be played
in a sequence.
3. Set the ON/OFF
switch to the “
ON2
” position to operate the Magic Village
with light only. Set the ON/OFF switch to the
“
OFF
” position to switch off the device.
Stopper
To prevent the Magic Village ball from accidental-
ly slipping off the stand, slide the stopper over the
end of the stand, as shown in the picture (similar
illustration).
Cleaning and Storing
Clean the Magic Village only with a soft dry cloth or with a suitable soft
brush. Do not use detergents or chemicals as this may damage the sur-
faces.
Store the Magic Village indoors in a dry place that is protected from dust,
dirt and extreme temperatures. Store the Magic Village out of reach of
children.
Technical Data
Dimensions:
Ø 20 x H 25 cm
Battery: 3x LR6 (AA)
Weight:
1911 g with Stand (w/o Batt.)
ON1
ON2
OFF
