Westfalia 90 02 50, Оригинальное руководство пользователя

Страница: 27 / 38

23
Operation
Hoses Storage
When not in use, the hoses provided with the inflator can be placed ln
the storage areas located on both sides of the compressor.
Service
Warning: Always disconnect from the mains power supply, before
carrying out any maintenance/cleaning of the charger. Remove the
battery before carrying out any maintenance/cleaning of the tool.
Note: Both the tool and the charger contain no user-serviceable parts.
If the device does not perform as outlined in this manual, turn to the
Westfalia customer service or to a competent professional.
General Inspection

Regularly check that all the fixing screws are tight as they may
become loosened during use due to vibration.

Inspect the supply cord of the charger for damage or wear prior to
each use. Repairs should be carried out by an authorised service
centre. This advice also applies to extension cords used with this
tool.
Battery Disposal
1. Run motor until the battery is completely discharged.
2. Remove the battery from the tool.
3. Wrap heavy insulating tape around the battery terminals or enclose
in a sealable plastic bag to prevent possible shorting.
4. Dispose of the battery through your local waste removal authority.
Maintenance and Cleaning

Remove the battery before undertaking any cleaning or maintenance
work.

Use only a moist cloth to clean the unit. Do not use aggressive
chemicals which may dissolve plastic parts, or abrasives. Always
keep the ventilation slots clean and free from obstructions.

The cordless drill is maintenance-free.

The battery can be recharged up to 500 times if treated carefully.