Lit. No. 96452, Rev. 02
1
March 5, 2007
1. Turn the vehicle ignition switch to the ON or the
ACCESSORY position.
2. Press the ON/OFF switch on the control. The control
indicator light glows red, indicating the control is on.
The indicator light glows red whenever the control
and the vehicle ignition switch are both on and the
electrical connections to the plow are completed.
The ON/OFF switch operates as an emergency
stop if required.
WARNING
To prevent accidental movement of the blade,
always turn the ON/OFF switch to OFF
whenever the snowplow is not in use. The
control indicator light will turn off.
Function Time Outs
All control functions, except LOWER/Float, time out
(stop) automatically after a period of time. This is to limit
the amount of electrical energy required from the vehicle.
While the operation of the WIDE-OUT, MVP PLUS and
MVP control are the same, the time-outs vary. See the
table below for each control’s time-out by function.
NOTE: If control function times out before desired
blade movement is complete, release button and
press again.
The control will automatically turn off after being idle
for 20 minutes.
Smooth Stop
The control automatically allows the blade to coast to
a stop when the button is released. This results in
smoother operation, reduces shock to the hydraulic
system and increases hose and valve life.
A DIVISION OF DOUGLAS DYNAMICS, L.L.C.
RAISE
LOWER
R
L
ON/OFF
FLOAT
RAISE
LOWER
R
L
ON/OFF
FLOAT
SCOOP
WING
VEE
WING
S C
O O P
WING
R
E T R A CT
WING
Float
Light
(green)
Power
Indicator
Light (red)
Power
Indicator
Light (red)
ON/OFF Button
(Emergency Stop)
WIDE-OUT
MVP PLUS & MVP
WESTERN PRODUCTS
P.O. BOX 245038
MILWAUKEE, WI 53224-9538
96600 MVP PLUS™
96500 WIDE-OUT™ and
96462 MVP
®
CabCommand
HAND-HELD CONTROLS
Operating Instructions
