Western Global ECW105, Руководство пользователя

Страница: 13 / 21

WM038 EasyCube 105 v1 EN Feb 2021
11
FILLING THE EASYCUBE
• DO NOT FILL TANK WHEN DISPENSING IS IN OPERATION
• Only fill the EASYCUBE to 95% (Safe Fill) of its nominal capacity
• Filling should only be performed by a suitably trained person and only following
a full risk assessment
• The EASYCUBE must be positioned on a firm level surface, whether static, truck
or trailer mounted
• Where truck or trailer mounted, ensure that the parking brake is set to ON and
the wheels are chocked
• Before filling, ensure that you have a suitable spill containment kit and that you
are wearing all required PPE
• Nozzle Fill - Unscrew and remove the vent / fill cap, place the filling nozzle in
the port.
• Do not leave the nozzle unattended during the filling process
•
Observe the fuel level gauge for an indication of tank capacity, then once filled,
replace the filler cap and clean up any spills
DISPENSING FUEL
There are two options available for dispensing/supplying fuel. Either manually via
a fuel pump and nozzle or by direct coupling to the equipment such as a generator.
NOTE: Direct coupling cannot be used in conjunction with a pump simultaneously
• By Fuel Pump - For the information about any pump system fitted to this
EASYCUBE, please refer to documents supplied with the pump.
• Direct Coupling - enables continuous fuel feed to equipment such as
generators where fuel is required continuously.
TRANSPORTING
•
When transporting ALL ports, valves and caps must be closed
• Ensure pump is turned off
• Close and lock the access lid
• The EASYCUBE must be secured firmly to its means of transport.
STACKING
Do Not Stack