CONFIGURING SETTINGS
112
WD MY CLOUD EX4 PERSONAL CLOUD STORAGE
USER MANUAL
Language and Clock
In this section of the General page, you can change the language that displays in the
WD My Cloud EX4 device’s interface and set the date and time. The date and time are
synchronized to the NTP (Network Time Protocol) server by default. You have the option of
setting the date and time manually or allowing the NTP to access the Internet and
automatically set the time. If you are not connected to the Internet, you must enter the date
and time manually.
1. In the Language & Clock section, view or modify the following settings
:
2. Click
Save
for each change you make.
Language
From the drop-down list, select the language you’d like to display
on your WD My Cloud EX4 Personal Cloud Storage web pages.
The default language is English.
Time Zone
From the drop-down list, select the time zone where your device
is located.
NTP Service
Enable or disable NTP service, which automatically synchronizes
your device to update the time and date. A dialog box displays
current NTP servers. You can add another NTP server if you
choose.
Primary Server
Change the primary server used for your NTP service.
•
To change the primary server used for your NTP service, click
Configure
,
•
Click
Add User NTP
then enter the URL address of the new
primary server.
•
Click
Save
.
Date & Time
Displays the device date and time. This information is
synchronized to the NTP (network time protocol) server by
default.
