Western Digital BLACK 2, Руководство по установке

Страница: 24 / 26

WD Black² Fusion and Dual Drive Configuration for Mac
Installation Guide
RESTORING THE MASTER DRIVE IMAGE TO THE WD BLACK² DRIVE 20
3. A warning message displays informing you that the partition will be erased.
Click OK and wait for the restore process to finish.
4. When the restore process is finished, shut down your Mac and disconnect the
original USB attached drive. You are now finished and can begin using your Mac.
Restoring to a Dual Drive (Non-Fusion)
Important: To restore your original disk image to the SSD portion of the
Black
2
dual drive in a Dual Drive (Non-Fusion) configuration, the original disk
image MUST be smaller than 120 GB. Verify this before continuing.
After clicking Continue from the OSX Utilities Window in Step 4 on page 18 , the
below screen appears.
1. In the left window pane, select the USB drive partition containing the Mac OSX
operating system, and then click the Restore tab at the top of this window, next
to the RAID tab. The USB partition will appear in the Source field.