Western Digital BLACK 2, Руководство по установке

Страница: 18 / 26

WD Black² Fusion and Dual Drive Configuration for Mac
Installation Guide
SETTING UP THE WD BLACK² DRIVE 14
Create a Dual Drive (Non-Fusion)
To create a Dual Drive (Non-Fusion), use the Create Dual Drive Volumes utility.
1. Locate the WD Black² Configuration Utility that you downloaded from the
“Getting Started” section , and unzip it on your desktop.
2. Double-click the Create Dual Drive Volumes utility. A warning message
appears.
3. Read the warning message and click OK .
In a few minutes the following message will appear, indicating that the Dual Drive
was successfully created.
4. Click OK .
5. To verify your configuration, continue to the section, “Verify Creation of a Fusion
Drive or Dual Drive (Non-Fusion).”