User Guide
6. Management
6.6 T10 Zoning
Figure 25:
SAS Cable Configuration
Table 14:
SAS Cable Configuration
Host Connection (SAS Port)
Enclosure Connection (SAS Port)
Host 1
ESM A
Port 1
Host 1
ESM B
Port 1
Host 2
ESM A
Port 2
Host 2
ESM B
Port 2
Host 3
ESM A
Port 3
Host 3
ESM B
Port 3
6.6.3
Enabling Zoning using Linux
Step 1 :
Step 2 :
Enable zoning for each of the sg devices that are associated with the 2U24 Flash Storage
Platform ESMs.
a.
Issue the following command to enable zoning on ESM A using the first sg device:
hgst_cli_tool -d /dev/sg<devicenumber> -c “zone set 1”
Example of Enabling zoning on the First ESM Device Results
cli_cmd = zone set 1
Zoning function has been ENABLED with default THREE_MACHINES
configuration!
b.
Issue the following command to enable zoning on ESM B using the second sg device:
hgst_cli_tool -d /dev/sg<devicenumber> -c “zone set 1”
Example of Enabling zoning on the Second ESM Device Results
47
