2.5.2. FCC Part 15.105 Class A Notice
This product has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
when the product is operated in a commercial environment.
This product generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the user manual, may cause harmful interference to radio
communications. Operation of this product in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at the users
own expense.
2.5.3. EN/IEC/UL 62368-1 Notice
1
This product has been tested and found compliant to EN/IEC/UL 62368-1, Safety for
Communication Technology. In accordance with the definitions of the standard, this
product shall be handled by instructed personnel. Energy source classifications are
according to following:
Electrical energy source
Power port
ES1
Serial port
ES1
Ethernet port
ES1, TNV-1
I/O port
ES1
Power source
Power port
PS3
Thermal energy source
Enclosure
TS1
Mechanical energy source
Enclosure
MS1 (MS3 for wall or ceiling mounting)
Radiation energy source
SFP
RS1
Table 2. EN/IEC/UL 62368-1 notice
2.5.4. Corrosive Environment
This product has been successfully tested in a corrosion test according to IEC 60068-2-60,
method 3. This means that the product meets the requirements to be placed in an
environment classified as ISA-S71.04 class G3.
CORROSIVE GASES
If the product is placed in a corrosive environment, it is important that all
unused connector sockets are protected with a suitable plug, in order to
avoid corrosion attacks on the gold plated connector pins.
1
Pending
8
RedFox 7528 Series
