Ibex-RT-370 Series User Guide
Westermo Network Technologies
22
5
Specifications
5.1
Interface Specifications
AC, Power port
Connector
Binder 693-type male
Nominal voltage range
100...240 VAC
Operating voltage
90...264 VAC
Rated current
0.2 A
Rated frequency
50/60 Hz
Inrush current
Peak: 42 A peak at 240 VAC, 90° phase
Duration: 1 ms
Touch current
< 3.5 mA
Startup current
1
2 x nominal current
Redundant power input
No
Conductor cross section
(flexible)
0.5
…2.5
mm² (AWG 20
…13
)
Cable temperature rating
-40 to + 70°C
Shielded cable
Not required
Ethernet FO
Connector
ODC-2 male
Wavelength
1310 nm
Data rate
1000
Mbit/s
Transmit power
-
16…
-7dBm
Receiver sensitivity
-32dBm or better
Receiver Saturation
2
-3dBm
Ethernet TX
Connector
M12 X-coded female
Electrical specification
IEEE std 802.3
Data rate
10 Mbit/s, 100
Mbit/s, 1000 Mbit/s, manual or auto
Duplex
Full or half, manual or auto
Transmission range
Up to 100 m with CAT5e cable or better
Cabling
Shielded cable CAT5e or better is recommended
Conductive chassis
Yes
NOTE
The product is to be connected to internal Ethernet networks without exiting a
facility and being subjected to TNVs.
1
Recommended external supply current capability for proper startup
2
Optical attenuators need to be added to the installation if the optical level is above this limit
