Westermo GS-01, Руководство по установке

Страница: 35 / 56

35 6195-2201
Short Message commands
Parameters definition
<da> Destination Address, coded like GSM 03.40 TP-DA.
<dcs> Data Coding Scheme, coded like in document [5].
<dt> Discharge Time in string format: ”yy/MM/dd,hh:mm:ss±zz”
(Year [00-99], Month [01–12], Day [01–31], Hour, Minute,
Second and Time Zone [quarters of an hour]).
<fo> First Octet, coded like SMS-SUBMIT first octet in
document [4], default value is 17 for SMS-SUBMIT.
<index> Place of storage in memory.
<length> Text mode (+CMGF=1): number of characters PDU mode
(+CMGF=0): length of the TP data unit in octets.
<mem1> Memory used to list, read and delete messages.
(+CMGL, +CMGR and +CMGD).
<mem2> Memory used to write and send messages.
(+CMGW, +CMSS).
<mid> CBM Message Identifier.
<mr> Message Reference.
<oa> Originator Address.
<pid> Protocol Identifier.
<pdu> For SMS: GSM 04.11 SC address followed by GSM 03.40
TPDU in hexadecimal format, coded as specified in doc [4]
For CBS: GSM 03.41 TPDU in hexadecimal format.
<ra> Recipient Address.
<sca> Service Center Address.
<scts> Service Center Time Stamp in string format:
“yy/MM/dd,hh:mm:ss±zz”.
(Year/Month/Day,Hour:Min:Seconds±TimeZone).
<sn> CBM Serial Number.
<st> Status of a SMS-STATUS-REPORT.
<stat> status of message in memory.
<tooa> Type-of-Address of <oa>.
<tora> Type-of-Address of <ra>.
<tosca> Type-of-Address of <sca>.
<total1> Number of message locations in <mem1>.
<total2> Number of messages locations in <mem2.
<used1> Total number of messages locations in <mem1>.
<used2> Total number of messages locations in <mem2.
<vp> Validity Period of the short message, default value is 167.