Westermo DDW-142, Руководство пользователя

Страница: 17 / 28

For advanced network settings and more diagnostic information, please use the CLI.
Detailed documentation is available in the chapter ”The Command Line Management Tool” in
the WeOS Management Guide.
Factory default:
IP address: 192.168.2.200
Netmask: 255.255.255.0
Gateway: disabled
4.5. Configuration Via a Web Browser
The product can easily be configured via a web browser. Open the link http://192.168.2.200
in your web browser, and you will be prompted with a login screen, where the default
settings are:
Username: admin
Password: westermo
Once logged in, use the extensive integrated help function describing all configuration
options.
Two common task when configuring a new switch is to assign appropriate IP settings, and
to change the password of the admin account. The password can be up to 64 characters
long, and should consist of printable ASCII characters (ASCII 33-126); 'Space' is not a valid
password character.
4.6. Factory Default
It is possible to set the product to factory default settings by using a standard Ethernet
RJ-45 cable.
1. Power off the product and disconnect all cables.
2. Connect an Ethernet cable between Ethernet ports 1 and 2. The product needs to be
connected directly by an Ethernet cable, i.e., not via a hub or switch. Use a straight
cable – not a cross-over cable – when connecting the ports.
3. Power on the product.
4. Wait for the product to start up. Control that the ON LED is flashing red. The ON
LED flashing indicates that the product is now ready to be reset to factory default. It is
now possible to go ahead the factory reset or to skip factory reset and boot as
normal.
To go ahead with factory reset:
NOTE
Do not power off the product while the factory reset process is in
progress.
DDW-142/242-12VDC-BP 17