3.5. LED Indicators
LED
Status
Description
ON
OFF
Product has no power
GREEN
All OK, no alarm condition
RED
Alarm condition, or until product has started
up. (Alarm conditions are configurable, see
WeOS Management Guide)
BLINK
Location indicator ("Here I am!"). Activated
when connected to WeConfig tool, or upon
request from web or/and CLI. RED BLINK
during boot indicates pending cable factory
reset.
RSTP
OFF
RSTP disabled
GREEN
RSTP enabled
BLINK
Product selected as RSTP/STP root switch
FRNT
OFF
FRNT disabled
GREEN
FRNT OK
RED
FRNT error
BLINK
Product configured as FRNT focal point
DC
OFF
Product has no power
GREEN
Power OK. Input voltage > 70% of minimum
nominal voltage
RED
Power failure. Input voltage < 70 % of
minimum nominal voltage
X1 to X12
OFF
No link
GREEN
Link established
GREEN
FLASH
Data traffic indication
YELLOW
Port alarm, or port is set in blocking state by
link redundancy protocol
PoE
OFF
Port does not consume PoE power
GREEN
Port consumes PoE power
Table 10. LED indicators
Viper 12A-PoE Series
15
