Warranty policy
17
Decommissioning
17.1
Decommissioning
After finishing operation, the must
WR 870
be stored properly: When storing the
machine, the following points must be observed:
The
WR 870
must be placed in such a way that it cannot tip over or
fall.
At the storage site, the ambient conditions must meet the required
conditions (see technical data).
The machine, which does not have sufficient protection itself,
must be protected against the effects of the weather and
corrosive substances if these can impair safety.
If the machine is to be shut down for a long time, it may be necessary to take
preservation measures to prevent corrosion and other damage.
17.2
Dismantling / Disposal
Disassembly/disposal should be carried out by a specialist. Using specialists in
the recycling and waste management sectors ensures that waste is disposed of
correctly and recycled. The existing raw materials of the
Radial Sweeper
must
be sorted according to disposal type and material. The copper-containing
components such as cables can be recycled. Equipment such as fuses,
batteries, capacitors, regulators, etc. must be disposed of as electronic waste,
these must not be disposed of with household waste in order to prevent
environmental damage. The support frame and the protective covers can be
recycled as metal scrap.
Page
50
of
59
After each use, connect the WR 870 Battery to the charger
