Service
VERSION: 01 - 2019.05
1)
STANDARD OPERATION
Use the up and down keys to move the table up
or down in the direction of the arrow, the table
stops when the end positions are reached.
Keep the button pressed until the desired
position has been reached.
2)
CONTAINER STOP AND SHELF STOP POSITION
These two functions can be used to limit the travel range of the table
(for example, if a container is under the sit-stand table or a shelf is
hanging over the table). A container stop position can only be set in the
lower half of the travel range, a shelf stop position only in the upper half
of the travel range. If a container stop position is set, this is used as the
lower end position, a shelf stop position corresponds to the upper end
position of the travel range.
To save a container or shelf stop position, proceed as follows:
•
Move the table to the position you want to use as the new container
or shelf stop position
•
Now press the Up and Down buttons simultaneously for 10
seconds. The save process is confirmed by the controller with a
double-click tone
To deactivate a container or shelf stop position, proceed as follows:
•
Move the table to any position in the lower half of the driving range
to deactivate the container stop or in the upper half of the travel
range for the shelf-stop position
•
Handset Up / Down: Now press the Up and Down keys
simultaneously for 10 seconds.
Auf
Ab
