Westermann Cleanmeleon ll Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 62

Westermann Cleanmeleon ll Скачать руководство пользователя страница 31

Westermann Cleanmeleon II

Westermann GmbH & Co. KG

27

4.7. Working with the vehicle

Remove the safety splint from the perforated profile and lower the
tool  using  the  foot  pedal  or  by  hand  using  the  spool  valve  until  it
touches the ground. You can now begin working with the vehicle.

If the splint is reinserted into the perforated profile above the hold-
er,  the  tool  can  only  offset  irregularities  in  the  floor  upwards  (not
applicable  for  the  Cleanmeleon  II  with  a  hydraulic  lifting  mecha-
nism).

If  the  splint  is  not  inserted  into  the  perforated  profile,  the  tool  can
offset irregularities in the floor upwards and downwards (not appli-
cable for the Cleanmeleon II with a hydraulic lifting mechanism).

A desired height can be set for the tool using the splint and the per-
forated profile.
In the Cleanmeleon II with hydraulic lifting mechanism, the desired
height can be set by hand using a spool valve.

The vehicle speed must be adapted to
the ground conditions!

«
...
29
30
31
32
33
...
»

Содержание Cleanmeleon ll































































Отзывы:

Нет отзывов