Westell Boxer BXM05V19-NMT, Инструкция по эксплуатации

Страница: 1 / 12

Equipment Issue A
030‐101643 Rev. B, May 2012
Section BXM‐05V‐20A
R
Copyright
E
2012 Westell, Inc. All rights reserved.
Westell
r
is a registered trademark of and Boxer
t
is a trademark of Westell, Inc.
Page 1 of 12
1205IARB
Boxer
t
BXM05V19‐NMT
Sealed Outdoor Cabinet with Vertical 5‐RU‐Rack
CONTENTS PAGE #
1. GENERAL 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. FEATURES 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. INSTALLATION 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. SERVICE & REPAIRS 9 . . . . . . . . . . . . . . . . . . . . . . . . .
5. CUSTOMER & TECHNICAL SERVICES 9 . . . . . . . .
6. WARRANTY & RETURNS 9 . . . . . . . . . . . . . . . . . . . . . .
7. SPECIFICATIONS 10 . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. GENERAL
1.1 Document Purpose
This document provides general, installation, and specifica­
tion information for the Westell
r
Boxer
t
BXM05V19‐NMT
Outdoor Cabinet with a built‐in, vertically‐oriented, 5‐RU by
19” relay rack. This product is designed to provide Network
equipment protection in outdoor environments. The intended
audience for this document is engineering, operations, and
installation personnel of MSO, Telco, and utility companies.
See Figure 1 for a closed view of the product, and Table 3 for
product ordering information and available options to use with
the BXM05V19‐NMT.
‐ NOTE ‐
Hereafter, the BXM05V19‐NMT Boxer cabinet also may be
commonly referred to as the “Boxer 5” or cabinet.”
1.2 Document Status
Whenever this practice is updated, the reason will be stated in
this paragraph. Revision B updates the Boxer part number and
updates Paragraph 1.3.
1.3 Product Purpose and Description
Boxer is a compact, NEMA 4, weather‐tight, outdoor cabinet
that houses and protects a wide range of electronic equipment.
Up to 5 RUs (8.75”) of rack space (19” racks) is available to
mount Network equipment inside the cabinet, such as:
S
Ethernet switches
S
Multiplexers
S
Fiber terminating equipment
S
Copper bonding solutions
S
Radio equipment
S
Smart Grid equipment
S
Media converters
S
xDSL boxes
Figure 1. Isometric Closed View of Boxer Cabinet
Figure 2. Open View of Boxer Cabinet
Weather Stripping
19” Rack
Channel
(see also
Figure 8
Figure 14 )
Cable
Access
Knock‐outs
Mesh Interior
Back Plate
Door Switch
S
DS3 hand‐offs, and
S
Virtually any equipment than can be mounted on the in­
ternal mesh backboard or in a 19” rack
Adjustable rack channels are mounted inside the cabinet at the
top and bottom walls, for a
rotated‐rack effect, allowing equip­
ment to be mounted vertically in the cabinet and minimizing or
streamlining the cabinet width. Boxer supports rapid equip­