PS71090-P8 Product Manual
March 2018, Rev A
WESTELL.COM
©2017 Westell Technologies
March 2018; Doc No. CS14000802UM rA
1.877.844.4274
Page 11 of 52
1 General Information
1.1
Document Purpose and Intended Users
The purpose of this document is to provide a step-by-step procedure to help experienced technicians or
engineers install and commission an in-building Passive Wireless Distributed Antenna System (DAS)
using Westell’s PS71090-P8 2W Public Safety Signal Booster. Follow the instructions in this guide to
minimize risks associated with modifying a live system and preclude service interruptions. This
document assumes the technician or engineer understands the basic principles and functionality
involved with an RF Signal Booster and in-building wireless systems. This guide has been written to
address the practical concerns of the installer.
1.2 Application
Use this guide whenever there is a need to add enhanced signal capability to an exis ting system or
when a Signal Booster is included in a new installation.
1.2.1 Product Registration Information
The serial number is located on the label on right-side of the enclosure. Record this number in Figure
1-1. Retain this manual, along with proof of purchase, to serve as a permanent record of your
purchase.
Figure 1-1: Product Registration
