RATINGS:
Frequency
315 MHz
Transmitter Power Input
DC 12V Alkaline Battery (size 23A)
Receiver Power Input
AC 125 Volts Grounded Electrical Outlet
Receiver Power Output
13 Amps/125 Volts Resistive
13 Amps/125 Volts General Purpose
1000W Tungsten
CLASSE :
Fréquence :
315 MHz
Entrée d’alimentation de l'émetteur
Pile alcaline 12 Vcc (type 23A)
Entrée d’alimentation du récepteur
Prise de courant 125 Vca mise à la terre
Sortie d’alimentation du récepteur
13 A/125 V résistifs
13 A/125 V à usage général
1 000 W tungstène
CLASIFICACIONES:
Frecuencia
315 MHz
Entrada de alimentación del transmisor
Batería alcalina 12V CC (tamaño 23A)
Entrada de alimentación del receptor
Tomacorriente eléctrico a tierra de 125V CA
Salida de alimentación del receptor
13 amperios/125 voltios Resistiva
13 amperios/125 voltios Uso general
1000W Tungsteno
Instruction Manual & Warranty
RFK306LC
Outdoor
Wireless Remote
and Plug-in Receiver
Limited One Year Warranty
AmerTac™ warrants this product to be free from defects in material and
workmanship for a period of one year from the date of purchase. AmerTac’s
obligations are limited to repairing or replacing any defective unit and are
effective only if such units are returned within one year of the purchase date
to AmerTac, 250 Boulder Drive, Breinigsville, PA 18031. Warranty void if
damage is due to misuse or improper installation. In no circumstance will
AmerTac be liable for consequential or incidental damages relating in any way
to this product.
Garantie limitée d’un an
AmerTac™ garantit ce produit contre tout défaut de matériaux et de main
d’œuvre pendant une période de un (1) an à partir de la date d’achat. Les
obligations d’AmerTac se limitent à la réparation ou au remplacement de tout
article défectueux et s’appliquent seulement si l’article est retourné dans
l’année de la date d’achat à AmerTac, 250 Boulder Drive, Breinigsville, PA
18031. AmerTac ne peut en aucun cas être tenue responsable pour des
dommages consécutifs ou accessoires liés de quelque manière que ce soit à
ce produit.
Garantía limitada de un año
AmerTac™ garantiza que este producto está libre de defectos de material y
mano de obra por un período de un año a partir de la fecha de compra. Las
obligaciones de AmerTac se limitan a reparar o cambiar la unidad defectuosa
y son efectivas sólo si se devuelve en un lapso de un año a partir de la fecha
de compra a AmerTac, 250 Boulder Drive, Breinigsville, PA 18031. La garantía
no será válida si el daño es causado por mal uso o instalación inadecuada.
En ningún caso AmerTac será responsable por daños consecuentes o incidentales
relacionados en cualquier forma con este producto.
Questions?, ¿Preguntas? 201.934.3224
©2010 AmerTac™
250 Boulder Drive
Breinigsville, PA 18031
www.amertac.com
Made in China
Hecho en China
Fabriqué en Chine
I10-0058-A
CAUTION:
Do not submerge in water.
USAGE:
• Control your outdoor lights from inside by remote control.
• Great for lighting and security applications.
• Effective Distance up to 60 feet.
• Plugs into any three pronged outdoor outlet.
INSTALLATION:
1. Mount the RECEIVER on the wall near a grounded electrical 120V
60Hz outlet. The nail or screw head must extend at least 3/16” out
from the wall. Hang the RECEIVER from the slot on the back of the
unit onto the nail or screw. Plug the power supply cord of the RECEIVER
into the outlet. Plug the cord of the device you with to control remotely
at the bottom of the RECEIVER.
2. Remove the plastic tab from battery compartment storage before
using the TRANSMITTER.
NOTE:
Do not install the RECEIVER horizontally or the remote control
signal may not be received.
OPERATION:
1. Press the “ON” button on the TRANSMITTER to turn the
RECEIVER “ON”.
2. Press the “OFF” button on the TRANSMITTER to turn the
RECEIVER “OFF”.
FEDERAL COMMUNICATIONS COMMISSION:
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B Digital Device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection.
This equipment generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions, it
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the RECEIVING antenna.
- Increase the separation between the equipment and RECEIVER.
- Connect the equipment to an outlet of a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
