Westcott FJ400, Руководство пользователя

Страница: 10 / 22

FJ400 Strobe: Getting Started
Charging the
FJ400 AC/DC Lithium Polymer Battery
The battery can be charged separately from the FJ400 or while attached to the FJ400. In both instances,
connect the power cord to the AC Adapter, connect the AC Adapter’s barrel plug to the battery AC
receptacle, and connect the power cord into a power outlet.
AC Adapter LED Indicator Light Colors
● Green: AC Adapter is plugged into a power outlet without a battery attached or connected to a
fully-charged battery.
●
Red: AC Adapter is plugged into a power outlet and the battery is currently charging and less
than 100% charged.
Attaching the
FJ400 AC/DC Lithium Polymer Battery
Attach the FJ400 Battery to the strobe by aligning the silver connection points on the rear of the strobe
to the holes on the silver strips located on the back of the battery and slide the battery down until it locks
into place.
Removing the
FJ400 AC/DC Lithium Polymer Battery
Ensure the FJ400 is OFF by long-pressing the Power | Model button until the LCD screen turns off. Then,
slide the release lock located on top of the battery away from the strobe, gently press the battery up and
away from the strobe to remove.
AC Power Operation
1. Ensure the battery charge level is ≥ 25%.
2. Ensure the battery is securely attached to the FJ400.
3. Plug the power cord into the AC Adapter.
4. With the strobe powered off, connect the AC Adapter’s barrel plug to the battery’s AC receptacle.
5. Plug the power cord into a dedicated power outlet.
6. Turn the strobe ON by pressing and holding the Power | Model button until the start-up screen
appears.
DC Power Operation
1. Ensure the FJ400 battery has been fully charged.
2. Ensure the battery is securely attached to the FJ400.
3. Turn the strobe ON by pressing and holding the Power | Model button until the start-up screen
appears.
9