background image

 

13

RIGblaster 

plug & play

 Warranty 

 

 
 
RIGblaster plug & play

 is warranted against failure due to defects in workmanship or materials 

for one year after the date of purchase from West Mountain Radio.  Warranty does not cover 
damage caused by abuse, accident, misuse, improper or abnormal usage, failure to follow 
instructions, improper installation, alteration, lightning, or other incidence of excessive voltage 
or current.  If failure occurs within this period, return the 

RIGblaster plug & play

 or accessory to 

West Mountain Radio at your shipping expense.  The device or accessory will be repaired or 
replaced, at our option, without charge, and returned to you at our shipping expense.  Repaired or 
replaced items are warranted for the remainder of the original warranty period.  You will be 
charged for repair or replacement of the 

RIGblaster plug & play

 or accessory made after the 

expiration of the warranty period. 
 
The Compact Disc of Radio Amateur Software Collection is excluded from any and all 
warranties by West Mountain Radio.  Note that the programs have been provided as shareware or 
freeware by the software authors to the amateur radio community for their use and enjoyment.  
The CD-ROM is to be used at your own risk. 
 
West Mountain Radio shall have no liability or responsibility to customer or any other person or 
entity with respect to any liability, loss, or damage caused directly or indirectly by use or 
performance of the products or arising out of any breach of this warranty, including, but not 
limited to, any damages resulting from inconvenience, loss of time, data, property, revenue, or 
profit, or any indirect, special incidental, or consequential damages, even if West Mountain 
Radio has been advised of such damages. 
 
Except as provided herein, West Mountain Radio makes no express warranties and any implied 
warranties, including fitness for a particular purpose, are limited in duration to the stated duration 
provided herein.

 

 
 
 
 
 
 
 
 
 
 

 

West Mountain Radio 

westmountainradio.com 

 

34 Smith Street, Norwalk, CT 06851 tel 203-853-8080 fax 203-299-0232

 

Содержание RIGblaster Plug & Play














Отзывы: