14
Cycles:
BASIC/
SPECIALTY
WHOLE
WHEAT
DOUGH
1½ lb.
2 lb.
1½ lb.
2 lb.
MIX
REST
KNEAD
RISE (1)
STIR-DOWN (1)
RISE (2)
STIR-DOWN (2)
RISE (3)
BAKE
– Light
Medium
Dark
6 min.
10 min.
23 min.
32 min.
4 min.
15 min.
3 min.
51 min.
55 min.
65 min.
75 min.
6 min.
10 min.
25 min.
28 min.
5 min.
15 min.
5 min.
45 min.
60 min.
70 min.
80 min.
6 min.
10 min.
26 min.
33 min.
5 min.
15 min.
3 min.
56 min.
55 min.
65 min.
75 min.
6 min.
10 min.
30 min.
33 min.
5 min.
15 min.
5 min.
45 min.
60 min.
70 min.
80 min.
6 min.
10 min.
23 min.
56 min.
4 min.
Total Time
(hr./min.)
Light
Medium
Dark
3:20
3:30
3:40
3:20
3:30
3:40
3:30
3:40
3:50
3:30
3:40
3:50
1:40
MIX –
When the bread maker is turned on, it will mix the ingredients about 6 minutes. The knead bars will start and stop during the
mixing action which is normal.
REST –
After the initial mixing period, the dough is allowed to rest about 10 minutes before the kneading action begins. You may
hear faint clicking sounds during this Rest period, which is normal and indicates the bread maker is working properly in keeping the
dough warm.
KNEAD
– The total knead time varies depending on the bread selection made and loaf size. Total kneading time at the
basic/specialty
setting ranges between 23 and 25 minutes; between 26 and 30 minutes at the
whole wheat
setting and 23 minutes at
the
dough
setting. The longer knead times are required at the whole wheat setting to better develop the gluten in whole wheat flour.
SPECIAL NOTES:
An audible alert will sound during the knead cycle of all settings to let you know when to add ingredients such as raisins, nuts, cheese,
etc. to prevent over mixing or crushing. Ignore alert if not adding ingredients.
If you need to make any adjustment to the recipe, such as adding a little more flour or liquid in order for the dough to form a ball and
be of soft consistency, you must make this adjustment during this knead period. Use alert described above, or set a separate timer to
remind you to check the dough during the kneading period to make any necessary adjustments.
RISE (1) –
After the dough is kneaded, it is allowed to rise for a certain period of time. You may hear faint clicking sounds during the
rise as gentle heat is being provided to keep the chamber warm.
STIR-DOWN (1)
– after the dough has risen, it is then stirred down briefly by the knead bar to remove excess carbon dioxide gas
created by the yeast.
SPECIAL NOTE:
If using the
DOUGH
setting, its cycle is complete at this time and ready for hand shaping,
rising and baking in you own oven. An audible alert will sound and the bread maker will turn itself off after completion of the
DOUGH
cycle.
RISE (2) –
The dough is then allowed to rise again, but for a shorter period time.
STIR DOWN (2)
– after the shorter rise time, the dough is again stirred down by the knead bars to remove excess gas and also to
shape the dough into a ball for the final rise. This final knead ensures that the bread will have good texture.
RISE (3) –
The dough then goes into the final rise to achieve its maximum height. Again, you may hear faint clicking sounds during
the rise as gentle heat is provided to keep the chamber warm.
BAKE –
The bread is then baked for the specified time depending on the
crust color
selection made: light, medium or dark. An
audible alert will sound when the bread is done and 0:00 will appear in the display. If the bread maker is not turned off, it will
automatically go into the
Keep Warm
mode for up to 3 hours. After the bread is removed, turn bread maker off by holding down the
START/STOP
button for 4 seconds or until the red signal light goes out.
Содержание 41085Z
Страница 9: ...8...
