Weslo Gym 1500, Руководство пользователя

Страница: 10 / 27

10
14. Attach the Long Cable (47) to the Small “U”-
Bracket (24) with an M8 Nylon Locknut (58) and
an M8 Washer (60).
See the inset drawing. Do
not overtighten the Nylon Locknut; it should
be threaded onto the end of the Cable only
two turns.
Attach the Small “U”-Bracket (24) to the Weight
Tube (26) with an M8 x 42mm Bolt (79) and an
M8 Nylon Locknut (58).
Do not overtighten the
Nylon Locknut; the “U”-Bracket must be able
to pivot on the Weight Tube.
15.
Locate the Short Cable (48). Route the Short
Cable through the cage on the Press Frame (6).
Attach a 90mm Pulley (44) to the Press Frame
with an M10 x 195mm Bolt (75) and an M10
Nylon Locknut (68).
Be sure that the end of the
Cable with the ball is on the indicated side of
the cage.
16. Wrap the Short Cable (48) around a 90mm Pulley
(44). Attach the Pulley and a pair of Pulley
Covers (43) to the lower hole in the Upright (3)
with an M10 x 98mm Bolt (78), an M10 Washer
(62), and an M10 Nylon Locknut (68).
Be sure
the small tabs on the Pulley Covers are on the
side shown.
17. Wrap the Short Cable (48) around a 90mm Pulley
(44). Attach the Pulley and a pair of Pulley
Covers (43) to the Press Frame (6) with an M10 x
85mm Bolt (66), an M10 Washer (62), and an
M10 Nylon Locknut (68).
Be sure the large tabs
on the Pulley Covers are on the side shown.
17
14
15
16
79
24
58
44
68
6
75
48
Cage
Ball
3
Small
Tabs
62
78
43
43
44
48
68
Large
Tab
68
6
66
62
44
43
48
43
47
47
24
26
58
60