Weslo Gym 1000, Руководство пользователя

Страница: 11 / 27

11
19. Wrap the Short Cable (23) around a 90mm Pulley
(15). Attach the Pulley and a pair of Pulley
Covers (73) to the upper hole in the Press Frame
(17) with an M10 x 87mm Bolt (25), an M10
Washer (9), and an M10 Nylon Locknut (21).
Make sure that the large tabs on the Pulley
Covers are on the side shown.
20. Wrap the Short Cable (23) around a 90mm Pulley
(15). Attach the Pulley and a pair of Pulley
Covers (73) to the upper hole in the Front Upright
(42) with an M10 x 97mm Bolt (16), an M10
Washer (9), and an M10 Nylon Locknut (21).
Make sure that the small tabs on the Pulley
Covers are on the side shown.
23
Small
Tabs
42
15 73
16
73
21
9
19
21
23
17
15
Large
Tabs
9
25
73
73
17. Locate the Short Cable (23). Route the Short
Cable through the bracket on the Press Frame
(17), as shown. Make sure that the Cable is
routed over the crossbar.
Hold a 90mm Pulley (15) inside of the bracket on
the Press Frame (17). Attach the Pulley to the
Press Frame with an M10 x 198mm Bolt (59), two
M10 Washers (9), and an M10 Nylon Locknut
(21).
18. Wrap the Short Cable (23) around a 90mm Pulley
(15). Attach the Pulley and a pair of Pulley
Covers (73) to the lower hole in the Front Upright
(42) with an M10 x 97mm Bolt (16), an M10
Washer (9), and an M10 Nylon Locknut (21).
Make sure that the small tabs on the Pulley
Covers are on the side shown.
17
21
15
59
9
9
Bracket
17
21
42
9
Crossbar
15
23
23
16
Small Tabs
18
73
73
20