The wiring list on the following pages contains the wire numbers, colors and types of wires used in the harness GO 1. Beginning and end of each wire are also identified
as to subunit name and terminal designation as far as the wiring of the organ is concerned, we do not make use of this list. It is provided as an aid in trouble-shooting and
for future reference.
Table 1 Wire List of Harness GO 1
Wire Material/Color
Starts at:
Ends at:
Purpose, Remarks
W = stranded
wire
(Subunit, PC Board, Terminal)
(Subunit, PC Board, Terminal)
S = shielded
cable
1 W blue
Power supply, PS 1, -15V
Tone generator, G 1, plug A, pin 8
Neg. supply voltage
2 W blue
Power supply, PS 1, -15V
Piano, PI 1, plug 3, pin -15V
Neg. supply voltage
3 W blue
Power supply, PS 1, -15V
Keyers, V 1, term. -15
Neg. supply voltage
4 W blue
Power supply, PS 1, -15V
Wersivoice, WV 7, pin 18 (-15)
Neg. supply voltage
5 W blue
Power supply, PS 1, -15V
Pedal electronics, P E 13, plug 7, pin -15
Neg. supply voltage
6 W blue
Power supply, PS 1, -15V
Preamp, VV 2, plug 5, pin - 15
Neg. supply voltage
7 W blue
Power supply,PS 1, -15V
Bus bar L/Man
Keying voltage for
envelope control
8 W blue
Power supply, PS 1, -15V
Program switches, S P 1, point -15
9 W blue
Power supply, PS 1, -15V
Wah wah control, term. A
10 W blue
Power supply, PS 1, -15V
Piano, PI 13, point "
Neg. supply voltage
11a W blue
Power supply, PS 1, -15V
Bus bar U/Man
Keying voltage for
envelope control
11b W blue
Bus bar U /Man
Envelope control, H K 13, U /Man, term. -1
5
Neg. supply voltage
12 W blue
Power supply, PS 1, -15V
A P 1, master pitch control, term. A (start) Neg. supply voltage
13 W blue
Power supply, PS 1, -15V
Programming, P R 1, plug 2, pin 17
Neg. supply voltage
14 W blue
Power supply, PS 1, -15V
Spec. effects rate control, term. S (wiper)
Neg. supply voltage
15a W blue
Power supply, PS 1, -1 5V
Spec. effects, E F 1, plug 1, pin 3
N eg. supply voltage
15b W blue
Spec. effects, E F 1, plug 1, pin 3
Spec. effects, E F 1, plug 3, pin 24
Neg. supply voltage
AM 071 (Part)
14
