Page 2
ENGLISH
WARNING!
Compliant fall protection equipment must only be used as it was designed.
Users MUST read and follow all user instructions provided with the product.
Before using a fall arrest system, users must be trained in the safe use of
the system, as required by OSHA 29 CFR 1910.30 and 1926.503, or local
safety regulations.
Misuse or failure to follow these warnings and
instructions may result in injury or even death.
WORK SAFE! WORK SMART!
IF YOU HAVE ANY QUESTIONS ABOUT THE PROPER USE OF THE EQUIPMENT,
SEE YOUR SUPERVISOR, USER INSTRUCTIONS, OR CONTACT WERNER CO.
FOR MORE INFORMATION.
WARNING!
All components of the Tripod System must be inspected prior to each use in
accordance with the requirements of OSHA 29 CFR 1910.140 and 1926.502.
The Tripod System is designed for up to two users at one time for emergency
rescue applications only.
Do not use the Tripod without the safety chain, or without safety chain
properly adjusted.
Shoulder D-rings of the full body harness are for rescue and entry/retrieval
applications only. Always use both shoulder D-rings together simultaneously.
Never use combinations of components or subsystems that may affect, or
interfere with, the safe function of each other.
If inspection reveals any defect, inadequate maintenance, or unsafe
condition, remove from service until a “competent” person, as defi ned by
OSHA 29 CFR 1926.32(f), can determine the need for authorized repair or
disposal.
Any equipment that has been subjected to the forces of arresting a fall,
or that has a deployed load indicator, must be removed from service until
a “competent person” can determine the need for authorized repair or
disposal.
WARNING!
