ALDEK
®
ALUMINUM SCA FFOLD
ASSEMBLY
INSTRUCTIONS
Страница 1: ...ALDEK ALUMINUM SCAFFOLD ASSEMBLY INSTRUCTIONS ...
Страница 2: ...ld Base Section Assembly Instructions Lock casters on remaining end frame and raise to vertical position Attach the opposite end of the horizontal brace to the remaining end frame at the same height on the vertical post Lock casters on one end frame by depressing foot brake Attach frame lock of horizontal brace to the out side vertical post of the end frame just above the second hori zontal from t...
Страница 3: ...n as shown Push outrigger up vertical post of base section until outrigger is against the top horizontal of end frame as shown 1 Attach outrigger to vertical post of base section with couplers as shown Adjust outrigger for maximum extension and set diagonally out from corner post at angle to maximize both length and width as shown 1 Lock telescoping leg with interlocking pin Check for firm support...
Страница 4: ...rame lock Rugged design and easy to use Aluminum Toe boards Added protection increase strength and helps keep tools from falling from scaffold Outriggers Added stability and increases maximum height of the tower Standard and Non Marring Casters Adjustable and lockable Non marring casters should be used in clean room environments Werner Scaffold Features Set The Standard For The Industry ...
