Seite
1 von 7
WHE-1, WHE-2
Operating Instructions
hydraulic handpump
ww
– WHE-1 + ww – WHE-2
1
drain valve
2
Connection P
(NPT 3/8”)
3
Venting- / filling cap
4
locking mechanism
5
Pump Lever
Read this operating manual and the safety instructions carefully before taking up the hand pump
WHE-1, WHE-2 into the operation!
1
Basic operation and designated use of the machine
1.1
The machine has been built in accordance with state-of-the-art standards and the recognized safety rules. Nevertheless, its use may
constitute a risk to life and limb of the user or of third parties, or cause damage to the machine and to other material property.
1.2
The machine must only be used in technically perfect condition in accordance with its designated use and the instructions set out in
the operation manual, and only by safety-conscious persons who are fully aware of the risks involved in operating the machine. Any
functional disorders, especially those affecting the safety of the machine/plant, should therefore be rectified immediately!
1.3
The machine is exclusively designed for the use described in the operating manual. Using the machine for purposes other than those
mentioned in the manual, such as driving and controlling other pneumatic systems, is considered contrary to its designated use. The
manufacturer/supplier cannot be held liable for any damage resulting from such use. The risk of such misuse lies entirely with the user.
Operating the machine within the limits of its designated use also involves observing the instructions set out in the operating manual and
complying with the inspection and maintenance directives.
2
Organizational measures
2.1
The operating manual must always be at hand at the place of use of the machine!
2.2
In addition to the operating instructions, observe and instruct the user in all other generally applicable legal and other mandatory
regulations relevant to accident prevention and environmental protection.
This also applies for wearing protective clothing, helmet with visor or goggles and protective gloves.
2.3
In order to avoid injuries, the machine must only be operated by a specially trained operator who has undergone a safety training.
2.4
Observe all safety instructions and warnings attached to the machine. Make sure that safety instructions and warnings attached to
the machine are always complete and perfectly legible.
2.5
Never make any modifications, additions or conversions which might affect safety without the supplier's approval. This also applies to
the installation and adjustment of safety devices and valves.
2.6
Spare parts must comply with the technical requirements specified by the manufacturer. Spare parts from original equipment
manufacturers can be relied to do so.
Release 05.10
