werma WERMA-StockSAVER, Руководство пользователя

Страница: 230 / 474

If the materials are recorded with a barcode scanner during placement:
1. Click Add .
The Create material bar code window appears.
2. In the Barcode field, enter the required barcode.
3. Click OK .
When all the material data has been entered:
1. In the toolbar, click Save .
5.3.2 Editing a material
1. Call up the material by clicking Back or Next in the toolbar.
- or -
1. Search for the material by clicking Search in the toolbar.
2. In the toolbar, click Set up .
The area for inputting the material data is enabled.
3. Modify the material data as required.
4. In the toolbar, click Save .
5.3.3 Deleting a material
1. Call up the material by clicking Back or Next in the toolbar.
- or -
72 310.865.005 0318_AB