Wenglor ZAG45FN01, Руководство по эксплуатации

Страница: 27 / 31

27
Sensoren für Ihren Erfolg www. wenglor .com Sensoren für Ihren Erfolg www. wenglor .com
15.1.1 Interface data
The table below lists the technical data of the interfaces and ports on the device. The data has been taken from the corresponding
Standards.
No. Interface designation
Physical interface
Ethernet
Ethernet 10/100 BaseT
RS-232-C
RS-232-C
RS-485/RS-422
RS-485/RS-422
1 Standard DIN 66020 EIA Standard
2 Transmission mode symmetrical
asynchronous
serial
full-duplex
half-duplex
 Difference signal
asymmetrical
asynchronous
serial
full-duplex
 Level
symmetrical
asynchronous
serial
half-duplex
full-duplex at RS-422
 Difference signal
3 Transmission method Multimaster CSMA/CD Master/slave Master/slave
4 Number of users: –Transmitters
–Receivers
512
512 1
1 32
32
5 Cable length: –Maximum
–Depending on baud
rate
100 m 15 m
no 1200 m
<93,75 kBd

1200 m
312 kBd

500 m
625 kBd  250 m
6 Bus topology Star Point-to-point Line
7 Data rate: –Maximum
–Standard
100 Mbit/s
10 Mbit/s
100 Mbit/s
(autodetect) 120 kBit/s
2,4 k/B
4,8 k/B
9,6 kBit/s
19,2 kBit/s
38,4 kBit/s 625 kBaud
2,4 kBit/s
4,8 kBit/s
9,6 kBit/s
19,2 kBit/s
57,6 kB
312,5 kB
625 kB
8 Transmitter: –Load
–Maximum voltage
–Signal, unloaded
–Signal, loaded 100 Ω 3…7 k Ω
±25 V
±15 V
±5 V
54 Ω
−7 V…12 V
±5 V
±1,5 V
9 Receiver: –Input resistance
–Maximum input signal
–Sensitivity
100 Ω 3…7 Ω
±15 V
±3 V
12 Ω
–7 V…12 V
±0,2 V
10 Transmit range (SPACE):
–Voltage level
–Logic level +3…+15 V
0 –0,2…+0,2 V
0
11 Transmit pause (MARK):
–Voltage level
–Logic level –3…–15 V
1 +1,5…+5 V
1
Table: Technical data of the interfaces at the module