Wenglor ZAC5 EN0 Series, Руководство по эксплуатации

Страница: 35 / 40

35
9.3. Device settings
Network settings:
When a switch is not operated on a controller, it is possible to change the network settings. By default, IP ad-
dress assignment is done via a DHCP server. In delivery condition, the network setting is set to “Obtain IP ad-
dress automatically”. If an individually set IP address is to be used the menu item “Use the following IP address”
must be selected. The network settings are saved by pressing the “Send” button. To make the changes of the
network settings take effect, it is necessary to disconnect the switch briefly from the power supply.
WARNING: Error-free operation of the product can only be guaranteed if the correct network settings are
entered in the web user interface. Any incorrect entry of the values could cause the device to
be no longer accessible in the network.
It must be ensured that supply power is not interrupted while making changes to network
settings. Furthermore, supply power must maintained for at least an additional 5 minutes
after the network settings have been saved to memory.