Wenglor ZAC5 EN0 Series, Руководство по эксплуатации

Страница: 14 / 40

14
EN
7.1. System Structure
7.2. Power Cable
1
2
3
4
5
1
2
3
4
5
Power In Power Out
0 V Pin 1 0 V Pin 1
0 V Pin 2 0 V Pin 2
Pin 3 FE Pin 3
24 V max. 9 A Pin 4
U
System
24 V max. 9 A Pin 4
24 V max. 9 A Pin 5
U
Digital I/O / Sensor
24 V max. 9 A Pin 5
The 7/8" plug is designed for a maximum current of 9 A per pin. This must be taken into account when looping
the supply voltage.
The switch must be connected to a power supply of 18 to 32 V DC. The U
System/Sensor
supplies the connection
with voltage and the U
Digital I/O
provides the power supply of the digital I/O ports.
The voltage of the U
System
must not be switched off during ongoing operation and hence must not be con-
ducted via emergency stop circuits, since otherwise the switch and all connected Ethernet products will not be
able to participate in the communication.
Digital
I/O-Ports
Digital
I/O-Port
Industrial Ethernet
Power