Wenglor weCat3D MLSL, Руководство по эксплуатации

Страница: 60 / 71

60 OLED Display
8.6 Configuration
Configuration Sensor Configuration Management

Load

Save
3
Back
7
Run
Load:
Save: Stored sensor settings are loaded.
Sensor settings are saved.
8.6.1 Load
Load Loading the Sensor Configuration

Standard

Set 1

Set 2
3
Back
7
Run
Standard
Set 1:
Set 2:
The values saved under standard are loaded automatically
when the sensor is started up.
The values saved to “Set 1” are loaded.
The values saved to “Set 2” are loaded.
8.6.2 Save
Save Saving the Sensor Configuration

Standard

Set 1

Set 2
3
Back
7
Run
Standard
Set 1:
Set 2: Sensor settings are saved under “Standard”.
Sensor settings are saved under “Set 1”.
Sensor settings are saved under “Set 2”.
8.7 Interface
Ethernet Settings for the Ethernet connection
IP Address
Subnet Mask
Std. Gateway
MAC Address
TCP/IP Port
Net Reset
3
Back
7
Run
IP Address: Display of the selected IP address.
Subnet Mask: Display of the selected subnet mask.
Std. Gateway: Display of the selected standard gateway.
MAC Address: Display of the preselected, non-changeable MAC address.
TCP/IP Port: Display of the TCP/IP port
Net Reset: Resets network settings to their default values
Changes do not become effective until after the sensor has been restarted.