4
General
1. General
1.1. Information Regarding these Instructions
• These instructions are intended for the product with the order code TIF352U0089.
• They make it possible to work with the product safely and efficiently.
• These instructions are an integral part of the product and must be kept on hand for the entire duration of
its service life.
• Furthermore, local accident prevention regulations and national work safety regulations must also be
observed.
Note!
The operating instructions must be read carefully before using the product and kept on file for
future reference!
1.2. Explanation of Symbols
• Safety instructions and warnings are emphasized by means of symbols and keywords.
• Safe use of the product is only possible if these safety instructions and warnings are observed.
• Safety instructions and warnings are laid out on the basis of the following principle:
Keyword!
Type and source of danger!
Possible consequences in the event that instructions or warnings are disregarded.
– Risk prevention measure.
The meanings of the keywords and the scope of the associated hazards are explained below:
Danger!
This keyword indicates a hazard with a high degree of risk which, if not avoided, results in death or
severe injury.
Warning!
This keyword indicates a hazard with a moderate degree of risk which, if not avoided, may result in
death or severe injury.
Caution!
This keyword indicates a hazard with a low degree of risk which, if not avoided, may result in minor or
moderate injury.
Attention!
This keyword indicates a potentially hazardous situation which, if not avoided, may result in property
damage.
