19
Temperature Sensor for Contactless Temperature Measurement
7. Settings
7.1. run (display mode)
You can immediately switch to the display mode by pressing the + key.
7.2. PInF (pin function)
Setting
Description
AnA
Analog Output
Use of the analog output (pin 6 is used as an analog output).
Output type (AnA) and temperature for 4 mA/0 V (A.Lo) and 20 mA/10 V (A.hI) must
be selected.
SP
Switching Outputs
Use of the switching output (pin 6 is used as switching output 2).
Switching points (SP1, SP2), output function (OFn1, OFn2) and switching logic (SL1,
SL2) must be selected.
7.3. AnA (select analog voltage output or current output)
Setting
Description
U
Voltage Output
Temperature is read out at the analog output as a voltage value within a range of 0 V
to10 V.
I
Current Output
Temperature is read out at the analog output as a current value within a range of
4 mA to 20 mA.
