18
EN
8.2. Measuring Accuracy and Error Influence
8.2.1. Calibration Report
A calibration report is included with the sensor, which graphically represents linearity error as a percentage
for the measured value on a matte white surface.
The following is an example of a calibration report:
Calibration Protocol
Order Number:
Serial Number:
MAC Address:
Measurement Conditions:
Measuring Range
Working Range
Measured Surface
Evaluation Method
Temperature
Laser Class
Differences to the above data can appear due to:
1. Target material and surface
2. Target geometry
3. Sensor mounting
4. Temperature fluctuation during the measurement
5. Strong circulation of warm air between sensor and tar
get
Further statements in the datasheet and the operati
on instructions are valid.
Inspector:
Date:
PNBC001
000001
00:07:AB:F0:0C:AB
4 mm
20...24 mm
White Surface
COG
20° C (+/-1° C)
2 (max 1.0 mW)
be
05.05.2017
