Wenglor P1PY1 Series, Руководство по эксплуатации

Страница: 17 / 38

17 Long-Range Laser Distance Sensors
5.2 Electrical Connection
• Wire the sensor in accordance with the connection diagram.
• Switch on the supply voltage (see
““3. Technical Data” on page 8 ).
• The blue supply voltage indicator lights up.
• Adjust the sensor so that the light spot strikes the object to be detected/measured.
O O
PNP
PNP
NO NC NO NC
241
11
44
22
33
E A1 E A1
55
E3 E3
NPN NPN
0...10V 0...10V
PUSH-PULL PUSH-PULL
O O
PNP
PNP
NO NC NO NC
242
11
44
22
33
E A1 E A1
55
E3 E3
NPN NPN 4...20mA
4...20mA
PUSH-PULL PUSH-PULL
– = supply voltage 0 V
+ = supply v
I/O1 = programmable input/output/IO-Link
I/O2
= programmable input/output
I3 = input
O = analog output
DANGER!
Risk of personal injury or property damage due to electric current!
Live parts may cause personal injury or damage to equipment.
• The electric device may be connected by appropriately qualified personnel only.
Wire Colors:
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Grey