Wenglor P1NK Series, Руководство по эксплуатации

Страница: 8 / 15

8 Technical Data
3.1.1 Spot diameter
Working Distance 0,5 m 1,3 m 2,6 m
Spot diameter 30 mm 45 mm 80 mm
Table 1
3.1.2 Smallest detectable part
Distance, Sensor to Reflector 0,5 m 1,3 m 2,6 m
Smallest detectable part 1,5 mm 4 mm 15 mm
Table 2
3.1.3 Switching distance
Achievable switching distance depends on the utilized reflector. Nominal switching distance is achieved with
reflector types RQ100BA. Achievable ranges for other reflectors are listed in the following tables:
Reflector Range Reflector Range
RQ100BA 0…2,60 m RR21_M 0…0,65 m
RE18040BA 0…1,50 m ZRME01B01 0…0,25 m
RQ84BA 0…1,80 m ZRME03B01 0…1,10 m
RR84BA 0…2,20 m ZRAE02B01 0…0,90 m
RE9538BA 0…0,85 m ZRMR02K01 0…0,30 m
RE6151BH 0…0,90 m ZRMS02_01 0…0,50 m
RE6151BM 0…2,00 m ZRAF08K01 0…0,40 m
RR50_A 0…1,55 m ZRAF07K01 0…0,40 m
RE6040BA 0…1,80 m ZRDF03K01 0…1,30 m
RE8222BA 0…1,10 m ZRDF10K01 0…1,40 m
RR34_M 0…1,20 m RF505 0…0,40 m
RE3220BM 0…0,90 m RF255 0…0,40 m
RE6210BM 0…0,50 m RF508 0…0,40 m
RR25_M 0…0,65 m RF258 0…0,40 m
RR25KP 0…0,35 m RF4050 0…0,30 m
NOTE!
• In order to increase the stability in the detection of highly transparent objects,
it is reccomended to use reflectors with microstructure.