16
EN
4.7.3. Energy saving mode
• Set rotary selector switch (07) to Power Save
è
Sensor functions same as in normal operating mode
EXCEPT
è
Power consumption is reduced by approx. 40 %
è
Switching Frequency is reduced to 1 kHz
4.8. Test Mode
• Set rotary selector switch (07) to Test
• Activate the plus button (24)
è
The Switching Point is set to the maximal switching distance possible
• Activate the minus button (25)
è
The Switching Point is set to the minimal switching distance value possible
5. Maintenance Instructions
• This wenglor Sensor is maintenance-free.
• It is advisable to clean the lens and the display, and to check the plug connections at regular intervals.
• Do not clean with solvents or cleansers which could damage the device.
6. Proper Disposal
wenglor sensoric gmbh does not accept the return of unusable or irreparable products. Respectively valid
national waste disposal regulations apply to product disposal.
