Wenglor CSHH001, Руководство по эксплуатации

Страница: 18 / 67

18 Installing the eazyScan software
6.3 Scanner feedback
Scenario Top LED Sound Vibration
Scanner has been started up correctly Green LED blinks 1 beep Vibrating handle
Successfully connected with the host
(RS-232) Green LED off 2 beeps Vibrating handle
Ready for deciphering Green LED off None None
Successful deciphering and data
transmission Green LED blinks 1 beep Vibrating handle
Configuration code successfully deciphered
and applied Green LED blinks 2 beeps Vibrating handle
Configuration code successfully deciphered
but couldn’t be applied Green LED blinks 4 beeps Vibrating handle
7. Installing the eazyScan software
7.1 Installation procedure
First verify whether there is a current version of the software available on the website. Go to www.wenglor.
com and download the most current version of the software, as needed.
If the software on the CD is the latest version, proceed as follows:
1. Insert the installations CD into the CD drive.
• Double-click on the “Install_eazyScan” setup program to begin. Administrator rights are required here.
2. Installation instructions will follow.
• The eazyScan software is installed.
The language setting for the software is the same as for the operating system. If a different language is de-
sired, it can be selected in the Settings menu.