Wen 2287, Руководство пользователя

Страница: 4 / 16

4
GENERAL SAFETY RULES
WARNING:
To avoid mistakes and serious injury, do not plug in your tool until the following steps have been read
and understood.
1. Use your air compressor in accordance with these instructions, taking into account working conditions and the
task at hand. Use of the compressor for operations other than its intended use could result in personal injury.
2. Always operate the compressor in a well ventilated area away from combustible materials, gasoline, or solvent
vapors. Your air compressor must be kept at least 20 feet away from explosive vapors.
3. Do not use your air compressor if the pressure switch does not turn on and off. An air compressor that cannot
be controlled with the switch is dangerous and must be repaired.
4. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect
your air compressor’s operation. If damaged, have your air compressor repaired by a qualified service technician
before using it again. Many accidents are caused by poorly maintained compressors.
SPECIFIC RULES FOR AIR COMPRESSORS
POWER TOOL USE AND CARE
1. Avoid accidental start-ups. Make sure the power switch is in the OFF position before connecting the plug to a
power source or carrying the tool.
2. Check power tool for damaged parts. Check for misalignment of moving parts, jamming, breakage, improper
mounting, or any other conditions that may affect the tool’s operation. Do not use the power tool if the switch does
not turn ON/OFF. Any part that is damaged should be properly repaired or replaced before use.
3. Do not force the tool to do a job for which it was not designed. Use the correct power tool and accessories and
follow the instructions for your application to prevent hazardous situations.
4. Remove adjustment tools. Always make sure all adjustment tools or wrenches are removed from the tool before
turning on the power tool.
5. Keep guards in place and in working order before operating the tool. All protection and safety devices must be
in place after completing repair and maintenance procedures
6. Never leave a running tool unattended. Do not leave the tool until it has come to a complete stop.
POWER TOOL MAINTENANCE
1. Always disconnect the power cord plug from the electrical outlet when making adjustments, changing parts, or
storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
2. Maintain power tools properly. Safely store power tools out of the reach of children. Always keep tools clean and
in good working order. Follow instructions for lubricating and changing accessories.
3. Only have your power tool serviced by a qualified repair person using only identical replacement parts. Use of
any other part can cause personal injury and damage to the tool.