NOTE: T-NUT INSERT MUST BE ON TOP OF SLATS.
STEP 1
INSERT SIDE RAILS(A) INTO THE TOP OF THE
STEP 3
SLOTS IN THE HEADBOARD AND PRESS DOWN.
REPEAT WITH THE FOOTBOARD.
STEP 2
B
ATTACH 2 SLAT SUPPORTS(C) TO EACH SLAT(B)
AS SHOWN.
ATTACH 4 SLATS(B) TO SIDE RAILS(A) WITH 8
WOOD SCREWS(D) AS SHOWN.
A
C
REF.
DESCRIPTION
QTY.
A
SIDE RAIL
2
B
SLAT
4
C
SLAT SUPPORT
8
D
WOOD SCREW
92W0831
8
may have come loose inside the carton during shipment. Place all parts on a clean, smooth surface such as a rug
or carpet to avoid scratching the parts. Be sure you have all the parts and hardware before you begin assembly.
400 Dividend Drive Suite 200 Coppell, TX 75019 Phone 1-800-759-1559 Fax 469-322-6501 www.WeltonUSA.com
Welton USA 09-07-10
MODEL : RL100K
ASSEMBLY INSTRUCTIONS
PAGE 1 OF 1
Anastasia
Thank you for purchasing this quality product. Be sure to check all packed material carefully for small parts which
NOTE : DURING ASSEMBLY, DO NOT TIGHTEN ANY HARDWARE UNTIL
THE COMPLETE UNIT HAS BEEN ASSEMBLED.
