weltico EASYLED, Инструкция по эксплуатации

Страница: 11 / 51

pREpaRaTIOn Of paRTS
1) light trim
The EASYLED comes with a trim to fix to the light.
2) Connection box.
With multiple projectors, the second entrance,
near the cable gland, must be pierced also.
Use a suitable tool to press firmly on the area
indicated by the arrow.
To get the projector cables through, the entrance
must be pierced. Use a suitable tool
to pierce the zone indicated by the arrow.
Trim.
Screws supplied.
LED light.
The cover can be locked with the
box with 4 screws to secure access
to the interior.
To do this:
Turn over the lid and drill right
through with a 4mm drill bit.
Align the lamp to the two «TOP» on the trim as
shown below.
The glass groves should be perpendicular to the
two arrows
Countersunk head tapping screws not
supplied.
* Screw diameter: 3.5 mm
* Length: 13mm
Page : 11