Weltem AMEARICOOL WPH-3000 Скачать руководство пользователя страница 1

1

Owner’s Manual

WPC-3000, WPC-4000, WPC-5000

Please read and save these instructions. Read carefully before attempting to assemble, install, oper-

ate or maintain the product described.

Protect yourself  and others by observing all safety information. Failure to comply with instructions 

could result in personal injury and / or property damage! Retain instructions for future reference.

AmeriCool by Weltem Portable Heat Pump feature spot 

cooling/heati ng for large areas where cooling/heati ng of the 
enti re area is not practi cal. A dedicated spot cooling/heati ng 
thermostat controls the unit in this applicati on.
This unit can also be used in smaller areas for room cooling/
heati ng. A control panel provides ease of use and contains 
a  self-diagnosti c  functi on  and  display,  showing  operati ng 
modes, room and set temperatures, and faults. 
If an abnormal operati on occurs, a visual display of the fault 
is  shown.  Caster  wheels  are  included  for  easy  portability. 
Suitable applicati ons include: a factory or work place, indus-
trial  kitchen,  computer  room,  emergency  cooling/heati ng, 
outdoor event, supplement cooling / heati ng etc.

Aft er unpacking the unit, carefully inspect unit for any damage that may have occurred during 
transit. Check for any loose, missing, or damaged parts.

Descripti on

Unpacking

Owner’s Manual

Specifi cati ons

WPH-3000

Portable Heat Pump

by

WPH-3000

Figure 1

Model No.

Power Supply Ph-V-Hz

Cooling Capacity 

Btu/h

Power Consump-

ti on Watt s

Rated Current 

Amps

EER Btu/

Wh

WPH-3000

Single Phase, 

115V, 60Hz

13,200(Cooling)

14,300(Heati ng)

0.94kW(Cooling)

0.95kW(Heatling)

8.58A (Cooling)

8.53A(Heatling)

11.0

Model No.

Power Cord Gauge 

AWG

Power Cord 

Length ft 

Dimensions 

W x D x H - in. (mm)

WPH-3000

12

6

20.6x 26.4 x 41.1

(523x 670 x 1044)

Содержание AMEARICOOL WPH-3000

















Отзывы: