Form No. WSOO
WellerTech Sheet
W60P(D)-W100P(D) Series
PRODUCT DESCRIPTION
A line voltage high quality portable tool with all the
advantages of controlled output and temperature. The
special Weller "closed loop" method of controlling maxi
mum tip temperature is employed, thereby protecting
temperature sensitive components.
The soldering pencil also features a stainless steel
modular plug in heater construction for greater soldering
efficiency, cool blue handle, a large selection of iron
plated tips and sizes, for W60P from 1 /16" to 1 / 4" and
for W100P from 1 /8" to 3/8" and both irons with choice
of tip temperature of 600, 700,
_
and 800
°
F. The W60P
irons are provided with a CT5A7 tip (700
°
1/16" diame
ter, screwdriver). The W100P irons are provided with a
CT6F7 tip (700" 1 /4" diameter screwdriver).
W60P
W100P
Both the W60P and W1 OOPJrnns are equipped with the cool blue handle. The W60P 2 wire and W1 OOP 2 wire are
U.L. approved. The 60P-3 and W100P-3 are U.L. and C.S.A. approved. The W60PD3 and W100PD3 are 240V 3 wire
irons. The modular heating elements are interchangeable and either handle can be used with either heating element.
SPECIFICATIONS
Electrical: 1. Line voltage - 120 Volts, 50/60 Hz (W60PD3 and W1 OOPD3 240 Volts, 50/60 Hz)
2. Soldering pencil wattage - W60P, 60 Watts
W100P, 100 Watts
3.
Tip leakage voltage to ground - 2 wire ± 5 Volts RMS
3 wire± 10 Millivolts
RMS*
Physical:
1. Perici I weight - W60P without cord 2 oz.
W1 OOP without cord 3 oz.
2. Pencil length - W60P less tip 7-1 /2"
W100P less tip 7-3/4"
3. Cord length - Six (6) foot all models.
4.
Nominal heat up time - W60P with CT5E7 tip = 11 O seconds
W1 OOP with CT6F7 tip = 11 O seconds
5. Nominal recovery time from 100
°
F drop - W60P with CT5E7 tip =
'-
16 seconds
.
W100P with CT6F7 tip
-
= 40 seconds
*Tip ground connected.
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
