65
(1)
Remove the lower dish-rack and the lid of the water
softener container.
(2)
When you fill the container for the first time, pour approx.
500 ml water into the container.
(3)
Put the equipped funnel in the opening and pour approx. 2
kg water softener (=dishwasher salt) in the container.
(4)
Close the lid carefully.
(5)
The control light for the hardness of water usually goes off
after 2-6 days.
NOTICE!
Start a washing programme as soon as you have filled
the container; otherwise the filter system, pump or
other important components of the appliance may be
damaged. Failure to do so will void the guarantee!
NOTICE!
You must fill the container when the salt indicator has
gone on. As long as the salt has not dissolved, the
indicator may stay on even the container is full. If
there are spills of the salt, a soak or rapid programme
should be run to remove excess salt.
4.2 Rinse aid
The rinse aid is added automatically during operation and
supports the spot-free and perfect drying of the dishes.
Your appliance is designed for using rinse aid.
The rinse aid container is inside the appliance near the
dishwasher detergent container.
Max. capacity of the container: approx. 140 ml.
Do not overfill the container; otherwise severe foam
formation may occur.
Do not forget to close the lid after refilling.
When the rinse aid indicator is not on, the colour of the
display device "D" indicates the needed quantity of rinse aid.
→
Dark spot = container filled to capacity.
→
The smaller the spot the emptier the container. The
container should be filled not less than 25%.
