Welch Allyn Connex Vital Signs Monitor 6000 Series Скачать руководство пользователя страница 84

Страница: 84 / 143

•

If the probe is positioned incorrectly in the ear canal or is moved during the measuring

process, the ExacTemp light goes out, a sequence of short beeps sounds, and the error

message POS (position error) appears.

7. When you are finished taking the temperature, press the ejector button to eject the used probe

cover.

8. Return the thermometer to the accessory dock.

The LED on the dock flashes while the measurement is being transferred.

After the transfer is complete, the temperature and the temperature scale appear on the Home

tab according to the monitor settings.

Note

Only the latest measurement is transferred to the monitor.

Note

Measurements that have already been transferred to the monitor

cannot be transferred again.

For more information about thermometer functionality, refer to the thermometer manufacturer's

directions for use.

Change the temperature scale on the ear thermometer

To switch from Celsius to Fahrenheit, refer to the thermometer manufacturer's directions for use.

Charge the ear thermometer battery

To charge the battery pack:
•

Place the thermometer in the accessory dock.

•

Make sure that the monitor is connected to AC power.

•

Make sure that the monitor is powered on.

The LED on the dock indicates the charging status of the battery pack:
•

Orange: The battery pack is charging.

•

Green: The battery pack is charged.

•

Not illuminated: The battery pack is not charging.

Note

The battery pack continues to charge while the monitor is in Display power saving

mode.

Note

It is strongly recommended that you use only the Welch Allyn rechargeable battery

pack in the thermometer because the dock cannot charge other batteries.

SpO2

SpO2 frame

The SpO2 frame, located above the Patient frame on the Home tab, displays data, information, and

controls used in pulse oximetry readings.

Patient monitoring

Welch Allyn Vital Signs Monitor 6000 Series™

Содержание Connex Vital Signs Monitor 6000 Series
















































































































































Результаты поиска

Содержание Connex Vital Signs Monitor 6000 Series

Отзывы:

Похожие инструкции для Connex Vital Signs Monitor 6000 Series

Бренды по названию

Популярные бренды

Welch Allyn Connex Vital Signs Monitor 6000 Series, Инструкция по применению

Результаты поиска

Содержание Connex Vital Signs Monitor 6000 Series

Отзывы:

Похожие инструкции для Connex Vital Signs Monitor 6000 Series

Бренды по названию

Популярные бренды