Welch Allyn Connex IWS, Инструкция по применению

Страница: 128 / 266

Capnography (CO2)
Monitors configured with Oridion Microstream capnography continuously measure or
indicate the following:
•
End-tidal CO2 (etCO2): the level of CO2 in a patient's exhaled breath
• Fraction of inspired CO2 (FiCO2): the level of CO2 in a patient's inhaled breath
• Respiration rate (RR)
• Integrated Pulmonary Index (IPI): a numerical value that integrates four parameters
(etCO2, respiration rate, SpO2, and pulse rate) and indicates a patient's overall
respiratory status
Note
Monitors configured with Oridion Microstream capnography cannot be
configured with Acoustic Respiration (RRa).
etCO2 frame
The etCO2 frame displays data and controls used in monitoring the level of CO2 in a
patient's breath (etCO2 and FiCO2). Controls to pause or restart the CO2 pump as well
as to pause CO2 alarms also appear in the frame.
Note CO2 monitoring is available only with the Continuous Monitoring profile.
The frame provides a numeric view and a waveform view of CO2 data. You can toggle
between views by touching the left side of the frame.
etCO2 numeric view
The numeric view displays end-tidal CO2 (etCO2) and fraction of inspired CO2 (FiCO2) in
mmHg or kPa. The size of the etCO2 frame and displayed measurements varies based
on your configuration.
CO2 waveform view
The CO2 capnogram waveform view displays the CO2 waveform, enabling you to
observe a patient's breathing patterns and to determine adequate, hyperventilation, or
hypoventilation conditions.
The size of the etCO2 frame and displayed measurements varies based on your
configuration.
122 Patient monitoring Welch Allyn Connex
®
Devices