Welch Allyn 35900-NP-TE Скачать руководство пользователя страница 31

Страница: 31 / 71

Test results

Test phase

The screener automatically performs a calibration at the start of each test. During

calibration a series of tones are sent to the ear canal to calibrate the levels of the

frequencies to be tested. Following calibration of the test tones, the test phase begins

automatically.

Note

Press the

control panel button to abort a test in progress. No record of

an aborted test is saved in memory.

Graph styles

The results of a test are displayed as a graph. The graph is generated and shown during

the test and can be viewed after the test is complete.

There are two graph options for viewing the results:
•

The default view is a signal-to-ratio (SNR) bar graph. It displays the SNR for each DP

test frequency or TE frequency band.

•

The value graph view displays the absolute emission and noise levels for each DP

test frequency or TE frequency band.

SNR bar graph view

The default SNR bar graph view displays the emissions and noise floor (NF) as they are

measured. Each column represents one DP test frequency or one TE frequency band.

The height of each column represents the SNR being measured.

The horizontal green line at the decibel level corresponding to the SNR indicates the level

required for a PASS. A green bar indicates a PASS and a yellow bar indicates a REFER.

See “Change graph style” for instructions on how to switch the graph views between

SNR bar graph and value graph.

Содержание 35900-NP-TE








































































Результаты поиска

Содержание 35900-NP-TE

Отзывы:

Похожие инструкции для 35900-NP-TE

Бренды по названию

Популярные бренды

Welch Allyn 35900-NP-TE, Инструкция по применению

Результаты поиска

Содержание 35900-NP-TE

Отзывы:

Похожие инструкции для 35900-NP-TE

Бренды по названию

Популярные бренды