Instruction Manual & Warranty Information
17.
Cleaning and
Maintenance
If device is accidentally used without a probe cover, clean
the probe as follows:
–
Use a cotton swab with the Alcohol (70%
concentration) to clean the lens (on the inside of the
probe).
• To safely clean the probe window, gently wipe its surface
with a cotton swab slightly moistened with isopropyl
alcohol and immediately wipe dry with a clean cotton
swab.
• After cleaning, allow at least 5 minutes drying time
before taking temperatures.
• Use a soft, dry cloth to clean the thermometer display
and exterior.
• Do not submerge the thermometer in water.
• Periodic cleaning and disinfection of the device following
use to prevent patient cross infection.
• Use a soft cloth slightly moistened with a 75% isopropyl
alcohol solution to disinfect the thermometer and probe.
• Do not use abrasive cleaners.
• The probe is the most delicate part of the thermometer.
Use with care when cleaning the lens to avoid damage.
Note:
Do not use any chemical other than isopropyl alcohol
to clean the probe window.
Welcare_WET01_EarTherm_IM.indd 17
Welcare_WET01_EarTherm_IM.indd 17
3/12/21 2:21 pm
3/12/21 2:21 pm
